Cisco 300-625 Certification Exam Details
Cisco 300-625 certifications are globally accepted and add significant value to any IT professional. The certification gives you a profound understanding of all the workings of the network models and the devices that are utilized with it. NWexam.com is proud to provide you the best Cisco Exam Guides.
The Cisco 300-625 Exam is challenging, and thorough preparation is essential for success. This cert guide is designed to help you prepare for the CCNP Data Center certification exam. It contains a detailed list of the topics covered on the Professional exam. These guidelines for the DCSAN will help guide you through the study process for your certification.
To obtain Implementing Cisco Storage Area Networking certification, you are required to pass DCSAN 300-625 exam. This exam is created keeping in mind the input of professionals in the industry and reveals how Cisco products are used in organizations across the world.
300-625 Implementing Cisco Storage Area Networking Exam Summary
Exam Name- Implementing Cisco Storage Area Networking
Exam Number- 300-625 DCSAN
Exam Price- $300 USD
Duration- 90 minutes
Number of Questions- 55-65
Passing Score- Variable (750-850 / 1000 Approx.)
Recommended Training- Configuring Cisco MDS 9000 Series Switches (DCMDS)
Exam Registration- PEARSON VUE
Sample Questions- Cisco 300-625 Sample Questions
Topics covered in the Cisco CCNP Data Center 300-625 Exam
1. Deployment- 15%
- Describe installation and initial setup
● NX-OS
● DCNM
● POAP
- Describe secure boot
2. Implementation- 35%
- Implement Fibre Channel port channels
- Implement Fibre Channel protocol services
● Name Service
● Cisco Fabric Services (CFS)
- Implement FCoE
● FCoE Initialization Protocol (FIP)
● Priority flow control (PFC)
● Enhanced transmission selection (ETS)
● Data Center Bridging Exchange/Link Level Discover Protocol (LLDP)
- Implement VSANs
- Implement NPV and NPIV
- Implement device aliases and zoning
- Configure inter-VSAN routing
- Implement VSAN extensions
3. Management and Monitoring- 25%
- Configure DCNM
● DCNM-SAN client
● Licensing options
● DCNM Device Manager
- Configure RBAC
- Configure Fibre Channel fabric security
- Describe slow-drain analysis
- Implement SAN telemetry streaming
4. MDS Troubleshooting- 25%
- Troubleshoot Fibre Channel domains and duplicate domain ID
- Troubleshoot zoning and zone merge failure
- Troubleshoot boot and upgrade issues
What type of questions are on the Cisco 300-625 exams?
● Single answer multiple choice
● Multiple answer multiple choice
● Drag and Drop (DND)
● Router Simulation
● Testlet
CCNP Data Center 300-625 Practice Exam Questions.
Grab an understanding from these Cisco 300-625 sample questions and answers and improve your 300-625 exam preparation towards attaining a Implementing Cisco Storage Area Networking Certification. Answering these sample questions will make familiar with the types of questions you can expect on the actual exam. Doing practice with CCNP Data Center DCSAN questions and answers before the exam as much as possible is the key to passing the Cisco 300-625 certification exam.
300-625 Implementing Cisco Storage Area Networking Sample Questions:-
01. Which two tools are included in Cisco Prime DCNM for SAN?
(Choose two.)
a) Cisco Security Manager
b) Cisco Traffic Analyzer
c) Device Discovery
d) Cisco DCNM-LAN server
e) Cisco DCNM-SAN Client
02. A Cisco MDS Series Switch with the POAP feature boots and does not find the startup configuration. Which location is checked first when the switch enters POAP mode?
a) USB device that contains the software image files and the switch configuration file
b) DHCP server to bootstrap the interface IP address, gateway, DNS server, and TFTP IP addresses
c) TFTP server where the necessary configuration files are downloaded
d) HTTP server where the URL is used to download the software image
03. What is the effect of a non-graceful virtual machine shutdown on a virtualized server that is connected to a SAN with Fibre Channel interfaces?
a) NP Port reload connected to the upstream SAN switch
b) out-of-service Fibre Channel interfaces on the SAN switch
c) frames stuck in the storage system
d) frames stuck in the HBA buffer of the server
04. A network engineer is configuring a Cisco MDS switch for FCoE. Which two conditions must be considered during the implementation phase?
(Choose two.)
a) On Cisco MDS switches, system-defined class maps for class-FCoE and classdefault are enabled but can be deleted.
b) The QoS policy must be identical to other Cisco FCoE switches in the network.
c) On the Cisco MDS, the MTU is set equal to 2112.
d) VLAN 1 or the native VLAN can be mapped to an FCoE VSAN.
e) FCoE is already enabled on a Cisco MDS switch.
05. What does an unlicensed DCNM SAN fail to display?
a) Fibre Channel, FCoE, and iSCSI topologies
b) events and fault management
c) historical performance monitoring
d) real-time performance monitoring
06. After a subordinate switch requests a domain ID form a principal switch, the requested domain ID becomes the runtime domain ID, and all interfaces on the affected VSAN are isolated. What is a solution to the issue?
a) Add the received ID to the allowed list.
b) Configure a static domain on the subordinate switch and reboot the switch.
c) Enable the FICON feature on the affected VSAN.
d) Configure IVR NAT on the affected VSAN.
07. After user account attributes are modified in Cisco NX-OS, when do changes to the user’s session attributes take effect?
a) immediately
b) at the scheduled time
c) when the user logs out of a session
d) when the user creates a new session
08. Two stable fabrics have overlapping domains. After a switch from the first domain is joined to a switch from the second domain, both switches become isolated. What caused the problem?
a) The auto reconfigure option is disabled on both switches.
b) The autoreconfigure option is enabled on both switches.
c) The rcf-reject option is enabled on the interfaces.
d) The rcf-reject option is disabled on the interfaces.
09. Which EtherType is used by the FCoE Initialization Protocol?
a) 0×8913
b) 0×8914
c) 0×xfc0e
d) 0×8906
10. The principal switch on a Fibre Channel network fails to assign requested domain to a subordinate switch. What are two reasons?
(Choose two.)
a) Cisco Fabric Services distribution is not enabled on the switch.
b) The fabric is locked.
c) The requested domain is outside the allowed list.
d) The persistent FC ID feature is not enabled.
e) An existing switch already has the requested domain assigned.
Answers:
Question 01- b, e
Question 02- a
Question 03- b
Question 04- b, e
Question 05- c
Question 06- a
Question 07- d
Question 08- a
Question 09- b
Question 10- c, e
Not every IT certification is intended for professionals, but Cisco certification is a great deal. After achieving this Cisco 300-625, you can grab an opportunity to be an IT professional with unique capability and can help the industry or get a good job. Many individuals do the Cisco certifications just for the interest, and that payback as a profession because of the worth of this course.
Comments