Cisco 500-174 Exam Details
Cisco 500-174 certifications are globally accepted and add significant value to any IT professional. The certification gives you a profound understanding of all the workings of the network models and the devices that are utilized with it. NWexam.com is proud to provide to you the best Cisco Exam Guides.
The Cisco 500-174 Exam is challenging, and thorough preparation is essential for success. This cert guide is designed to help you prepare for the FlexPod Implementation and Administration certification exam. It contains a detailed list of the topics covered on the Professional exam. These guidelines for the FPIMPADM will help guide you through the study process for your certification.
To obtain Implementing and Administering the FlexPod Solution certification, you are required to pass FPIMPADM 500-174 exam. This exam is created keeping in mind the input of professionals in the industry and reveals how Cisco products are used in organizations across the world.
500-174 Implementing and Administering the FlexPod Solution Exam Summary
● Exam Name: Implementing and Administering the FlexPod Solution
● Exam Code: 500-174
● Exam Price: $300 (USD)
● Duration: 60 mins
● Number of Questions: 45-55
● Passing Score: Variable (750-850 / 1000 Approx.)
● Exam Registration: PEARSON VUE
● Sample Questions: Cisco 500-174 Sample Questions
● Recommended Practice: Cisco and NetApp FlexPod Implementation and Administration Specialist Practice Test
● Recommended Training: Implementing and Administering the FlexPod Solutions (FPIMPADM)
Topics covered in the Cisco FlexPod Implementation and Administration 500-174 Exam
Information Gathering for FlexPod Solutions- 10%
Describe the main FlexPod components
- Network
- Compute
- Storage
Describe the Cisco UCS components
- Fabric Interconnects
- Servers
FlexPod Design- 10%
Describe the storage components used in FlexPod
- E-Series
- FAS/AFF
Describe network switches supported in FlexPod
- Nexus 3000/Nexus 9000 and OSs
Describe the Cisco UCS servers used in FlexPod
- B-Series chassis and blades used in FlexPod
- C-Series servers used in FlexPod
FlexPod Configuration- 34%
Demonstrate knowledge of how to install and configure the FlexPod components
- Network
- Compute
- Storage
- Hypervisor components
Describe how to initialize the Fabric Interconnect
- Different UCS modes (e.g., end host/switched)
- Internal wiring of the Cisco UCS
- Policy criteria
Demonstrate knowledge of how to configure networks in a UCS solution
- QoS
- Configuration of port channels
- Configuration of UCS pools to be created
Describe when to configure SAN boot in a FlexPod solution
- Type of SAN boots to be configured
- How to map a LUN to a host
Demonstrate knowledge of how to configure a service profile
- Configure UCS service profile/template
Demonstrate knowledge of how to configure storage in a FlexPod solution
- Create a storage aggregate
- Storage virtual machine
- How NetApp storage implements RAID-TEC
- Importance of broadcast domain in ONTAP
- Difference between SAN and NAS LIFs
Demonstrate knowledge of how to configure Cisco Nexus switches
- Licenses
- Nexus VLANs
- NxOS switch configurations
- How to configure port channels between the Nexus switches and other devices
- vPC
- port-channel
FlexPod Administration- 26%
Demonstrate knowledge of how to administer FlexPod solutions according to FlexPod best practices
- Ability to enable/disable the UCS call home feature
- Ability to enable/disable NetApp AutoSupport
- Process for adding a block of IP addresses for KVM Access to UCS using UCS Manager
Describe FlexPod management applications
- UCS Management
- Storage system management
- Other tools
Demonstrate knowledge of how to install and upgrade the FlexPod solution
- ONTAP operating system
- UCS
- Nexus
- Hypervisor
FlexPod Troubleshooting- 20%
Demonstrate how to perform basic FlexPod troubleshooting
- Boot problems
- Network problems
- The correct WWPN to zone FC SAN LIF
- iSCSI IQN targets
What type of questions are on the Cisco 500-174 exams?
● Single answer multiple choice
● Multiple answer multiple choice
● Drag and Drop (DND)
● Router Simulation
● Testlet
FlexPod Implementation and Administration 500-174 Practice Exam Questions.
Grab an understanding from these Cisco 500-174 sample questions and answers and improve your 500-174 exam preparation towards attaining a Implementing and Administering the FlexPod Solution Certification. Answering these sample questions will make familiar with the types of questions you can expect on the actual exam. Doing practice with FlexPod Implementation and Administration FPIMPADM questions and answers before the exam as much as possible is the key to passing the Cisco 500-174 certification exam.
500-174 Implementing and Administering the FlexPod Solution Sample Questions:-
01. How are jumbo frames enabled on the Nexus 5548?
a) policy-map type network-qos JUMBOclass type network-qos class-defaultmtu 9216system qosservice-policy type network-qos JUMBO
b) system mtu jumbo 9000
c) system qosmtu 9216
d) policy-map type queueingclass type queueing class-defaultmtu 9216
e) system jumbo-frame
Answer: a
02. Which two are two possible features of the ‘Call Home’ feature in UCS Manager? (Choose two)
a) Generates a text message to configured cell phone numbers
b) Generates a syslog event
c) Ability to proactively open a case with the Cisco TAC with the ‘Smart Call Home’ feature
d) Generates emails to predefined email addresses when a problem is detected
e) Allows UCS to proactively pull down new software updates from Cisco
Answer: c, d
03. How many ACTIVE SPAN sessions exist on a Fabric Interconnect?
a) 1
b) 2
c) 4
d) 8
e) 16
Answer: b
04. Which statement is true for Fibre Channel QoS System Class?
a) One can modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will be remarked to 0
b) One cannot modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will be remarked to 0
c) One can modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will not be remarked
d) One cannot modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will not be remarked
Answer: b
05. Which sends support summary information to NetApp through HTTPS?
a) AutoSupport
b) FlexSupport
c) SnapSupport
d) TechSupport
Answer: a
06. When creating local user, which two are valid user names? (Choose two)
a) daemon
b) somebody
c) root
d) 1greatuser
e) 12345
f) best_user
Answer: b, f
07. Which three are types of Storage Virtual Machines?
(Choose three.)
a) data
b) cluster
c) flex
d) intercluster
e) node
f) vFiler
Answer: a, b, e
08. How many VEMs can one server have?
a) 4
b) unlimited
c) 1
d) 2
Answer: c
09. Which two are the expected outputs of network interface show?
(Choose two.)
a) IP addresses of NAS and iSCSI logical interfaces
b) iSCSI IQNs
c) Namespace of SAN logical interfaces
d) System WW node name
e) WW port names of Fibre Channel and FCoE logical interfaces
Answer: a, e
10. Where are log files located on a NetApp node?
a) /mroot/etc/crash/
b) /log/core/
c) /letc/log/crash
d) /etc/mlog/
e) /mroot/etc/log/mlog/
Answer: e
Not every IT certification intended for professionals, but Cisco certification is a great deal. After achieving this Cisco 500-174, you can grab an opportunity to be an IT professional with unique capability and can help the industry or get a good job. Many individuals do the Cisco certifications just for the interest, and that payback as a profession because of the worth of this course.
Comments