Cisco CCNP Enterprise 300-425 Certification Exam Details
Cisco 300-425 certifications are globally accepted and add significant value to any IT professional. The certification gives you a profound understanding of all the workings of the network models and the devices that are utilized with it. NWexam.com is proud to provide to you the best Cisco Exam Guides.
The Cisco 300-425 Exam is challenging, and thorough preparation is essential for success. This cert guide is designed to help you prepare for the CCNP Enterprise certification exam. It contains a detailed list of the topics covered on the Professional exam. These guidelines for the ENWLSD will help guide you through the study process for your certification.
To obtain Designing Cisco Enterprise Wireless Networks certification, you are required to pass ENWLSD 300-425 exam. This exam is created keeping in mind the input of professionals in the industry and reveals how Cisco products are used in organizations across the world.
300-425 Designing Cisco Enterprise Wireless Networks Exam Summary
● Exam Name: Designing Cisco Enterprise Wireless Networks
● Exam Code: 300-425 ENWLSD
● Exam Price: $550 (USD)
● Duration: 90 minutes
● Number of Questions: 55-65
● Passing Score: Variable (750-850 / 1000 Approx.)
● Exam Registration: PEARSON VUE
● Sample Questions: Cisco 300-425 Sample Questions
● Recommended Practice: Cisco Certified Network Professional Enterprise Practice Test
● Recommended Training: Designing Cisco Enterprise Wireless Networks (ENWLSD)
Topics covered in the Cisco CCNP Enterprise 300-425 Exam
Wireless Site Survey- 25%
- Collect design requirements and evaluate constraints
● Client density
● Real time applications
● AP type
● Deployment type (data, location, voice, video)
● Security
- Describe material attenuation and its effect on wireless design
- Perform and analyze a Layer 1 site survey
- Perform a pre-deployment site survey
- Perform a post deployment site survey
- Perform a predictive site survey
- Utilize planning tools and evaluate key network metrics (Ekahau, AirMagnet, PI, Chanalyzer, Spectrum Analyzer)
Wired and Wireless Infrastructure- 30%
- Determine physical infrastructure requirements such as AP power, cabling, switch port capacity, mounting, and grounding
- Determine logical infrastructure requirements such as WLC/AP licensing requirements based on the type of wireless architecture
- Design radio management
● RRM
● RF profiles
● RxSOP
- Apply design requirements for these types of wireless networks
● Data
● Voice and video
● Location
● Hyperlocation
- Design high-density wireless networks and their associated components (campus, lecture halls, conference rooms)
- Design wireless bridging (mesh)
● Modes of operation
● Ethernet bridging
● WGB and roaming
Mobility- 25%
- Design mobility groups based on mobility roles
- Optimize client roaming
- Validate mobility tunneling for data and control path
WLAN High Availability- 20%
- Design high availability for controllers
● Network availability through LAG
● Stateful Switchover (SSO)
● Anchor controller priority and redundancy
- Design high availability for APs
● AP prioritization
● Fall-back (assigning primary, secondary, and tertiary)
What type of questions are on the Cisco 300-425 exams?
● Single answer multiple choice
● Multiple answer multiple choice
● Drag and Drop (DND)
● Router Simulation
● Testlet
CCNP Enterprise 300-425 Practice Exam Questions.
Grab an understanding from these Cisco 300-425 sample questions and answers and improve your 300-425 exam preparation towards attaining a Designing Cisco Enterprise Wireless Networks Certification. Answering these sample questions will make familiar with the types of questions you can expect on the actual exam. Doing practice with CCNP Enterprise ENWLSD questions and answers before the exam as much as possible is the key to passing the Cisco 300-425 certification exam.
300-425 Designing Cisco Enterprise Wireless Networks Sample Questions:-
01. The SNR is correctly measured according to which one of the following statements?
a) The AP’s transmit power level minus the noise floor
b) The receiver’s sensitivity level minus the noise floor
c) The noise floor minus the AP’s transmit power level
d) The RSSI minus the noise floor
Answer: d
02. Which one of the following applications would be the most appropriate use for an AP model that has internal antennas?
a) A location where a relatively wide coverage area is desired
b) A location where coverage is needed toward one side of the AP
c) A location where a patch antenna’s pattern is required
d) A location where an omnidirectional antenna is not desirable
Answer: a
03. You need to perform a site survey for voice and real-time application support. What is the correct way to proceed?
a) Perform a data site survey first. Then multiply the AP density by 1.3.
b) Perform a data site survey, using a phone to measure the AP signal.
c) Perform a voice survey, testing calls to evaluate each cell edge.
d) Perform a standard survey, using voice RF parameters.
Answer: d
04. A single mobility group can have a maximum of how many controllers?
(Choose one.)
a) 10
b) 24
c) 50
d) 72
Answer: b
05. How are wired clients connected to MAPs bridged through the mesh network?
a) They are encapsulated in CAPWAP and emerge on the configured VLAN on the controller.
b) Wired clients are not supported on a wireless mesh.
c) Wired traffic is not encapsulated in CAPWAP and is directed to the wired switch connected to the RAP.
d) Wired traffic is encapsulated in a special mesh frame header that is handled by the controller and then switched to the matching VLAN.
Answer: d
06. What is the primary purpose of coverage in a hospital?
a) Staff mobile devices
b) Medical machines
c) Patient and guest Wi-Fi
d) All of the above
e) Can’t say without more information
Answer: e
07. A high-density area in a wireless design is determined by which one of the following things?
a) More clients are using the 5GHz band than the 2.4GHz band.
b) A small number of clients in an area are using high-bandwidth applications.
c) A higher number of clients associate with each AP in an area.
d) A higher amount of RF coverage is needed in an area.
Answer: c
08. When deploying higher throughput wireless technologies in Local mode, what design aspect must be considered related to possible oversubscription of the physical infrastructure?
a) Uplink capabilities of the access switch should be considered.
b) Physical connections between the access switch and AP should be considered.
c) Performance of the backbone network connecting to the controller should be aligned with overall wireless performance demands.
d) Performance capabilities of the controller should be considered.
e) All of the above.
Answer: e
09. During your Layer 1 sweep in an office building, you find RF traces near a desk showing low power as well as multiple spikes across the 2.4GHz band. Which transmitter is most likely to produce this pattern?
a) A wireless security camera
b) An old 802.11b access point
c) A microwave oven
d) A Bluetooth headset
Answer: d
10. Your junior associate wants to start surveying a cubicle space in an office building. Where should the associate position the first AP to start the AP-on-a-stick survey?
a) At the corner of the building floor
b) At the geometric center of the floor
c) At the center of one cubicle block
d) Over the corridor between two cubicle blocks
Answer: a
Not every IT certification intended for professionals, but Cisco certification is a great deal. After achieving this Cisco 300-425, you can grab an opportunity to be an IT professional with unique capability and can help the industry or get a good job. Many individuals do the Cisco certifications just for the interest, and that pay back as a profession because of the worth of this course.
Comments