NetApp NS0-176 Certification Exam Details
NetApp NS0-176 certifications are globally accepted and add significant value to any IT professional. The certification gives you a profound understanding of all the workings of the network models and the devices that are utilized with it. NWexam.com is proud to provide you with the best NetApp Exam Guides.
The NetApp NS0-176 Exam is challenging, and thorough preparation is essential for success. This cert guide is designed to help you prepare for the FlexPod Implementation and Administration Certification exam. It contains a detailed list of the topics covered on the Professional exam. These guidelines for the FlexPod will help guide you through the study process for your certification.
To obtain FlexPodCisco and NetApp FlexPod Implementation and Administration certification, you are required to pass FlexPod NS0-176 exam. This exam is created keeping in mind the input of professionals in the industry and reveals how Cisco products are used in organizations across the world.
NS0-176 FlexPodCisco and NetApp FlexPod Implementation and Administration Exam Summary
● Exam Name: Cisco and NetApp FlexPod Implementation and Administration
● Exam Code: NS0-176
● Exam Price: $150 USD
● Duration: 60 minutes
● Number of Questions: 60
● Passing Score: 68%
● Exam Registration: PEARSON VUE
● Sample Questions: NetApp NS0-176 Sample Questions
● Recommended Practice: Cisco and NetApp FlexPod Implementation and Administration Practice Test
Topics covered in the NetApp FlexPod Implementation and Administration NS0-176 Exam
Information Gathering for FlexPod Solutions
- Describe the main FlexPod components
FlexPod Design
- Describe the storage components supported in FlexPod
- Describe the networking components supported in FlexPod
- Describe the compute components supported in FlexPod
FlexPod Configuration
- Describe how to install and configure the FlexPod components
- Describe how to configure neworks in a UCS solution
- Describe how to configure SAN boot in a FlexPod solution
- Describe knowledge of how to configure a service profile
- Demonstrate knowledge of how to configure storage in a FlexPod solution
- Demonstrate knowledge of how to configure Cisco Nexus switches
FlexPod Administration
- Demonstrate knowledge of how to administer FlexPod solutions according to FlexPod best practices
- Describe FlexPod management applications
- Demonstrate knowledge of how to install and upgrade the FlexPod solution
FlexPod Troubleshooting
- Demonstrate how to perform FlexPod troubleshooting
What type of questions are on the NetApp NS0-176 exams?
● Single answer multiple choice
● Multiple answer multiple choice
● Drag and Drop (DND)
● Router Simulation
● Testlet
FlexPod Implementation and AdministrationNS0-176 Practice Exam Questions.
Grab an understanding from these NetApp NS0-176 sample questions and answers and improve your NS0-176 exam preparation towards attaining a FlexPodCisco and NetApp FlexPod Implementation and Administration Certification. Answering these sample questions will make you familiar with the types of questions you can expect on the actual exam. Doing practice with FlexPod Implementation and AdministrationFlexPod questions and answers before the exam as much as possible is the key to passing the NetApp NS0-176 certification exam.
NS0-176 FlexPodCisco and NetApp FlexPod Implementation and Administration Sample Questions:-
01. Which three elements are included in a UCS service profile?
(Choose three.)
a) firmware revisions
b) volume layout
c) switch configuration
d) server definition
e) identity information
02. Your company has acquired a new NetApp EF600 storage array with a 25 Gbps HIC. In this scenario, which FlexPod-supported protocol should be used to connect to this array?
a) NFS
b) iSCSI
c) FC
d) SMB
03. A customer with several large Cisco MDS 9718 switches wants to reduce the number of total zones and the number of commands required to add devices, while still adhering to best practices.
In this scenario, which two configurations should be implemented?
(Choose two.)
a) Use the zone convert command to migrate existing zones.
b) Enable SMART Zoning for new VSANs.
c) Use the zone copy command to migrate existing zones.
d) Disable SMART Zoning for new VSANs.
04. A customer uses Cisco Intersight and now wants to monitor their NetApp storage system with Intersight. In this scenario, which three actions must be completed to accomplish this task?
(Choose three.)
a) Activate the API Gateway in Active IQ Unified Manager.
b) Get an Intersight Essentials tier license.
c) Activate the API Gateway in ONTAP System Manager.
d) Get an Intersight Advantage tier license.
e) Deploy Active IQ Unified Manager.
05. You are installing a FlexPod Express solution with a NetApp AFF A250 at a customer's remote site. In this scenario, which two devices are required to provide an NFS v3 datastore?
(Choose two.)
a) Cisco UCS 6324 Fabric Interconnects
b) Cisco Nexus 3000 Switches
c) NetApp BES-53248 Switches
d) Cisco UCS 6454 Fabric Interconnects
06. Exhibit:
You are configuring iSCSI boot from SAN on your UCS blades. Referring to the exhibit, how many paths will there be to the Boot LUN?
a) 2
b) 4
c) 6
d) 8
07. A customer wants to reuse existing networking equipment that was pulled from another data center for a new FlexPod Datacenter solution. They want to know if their switch models are supported.
In this scenario, which two switch models will accomplish this task?
(Choose two.)
a) Cisco Catalyst 6504
b) Cisco Catalyst 9300-48P
c) Cisco Nexus 9396PX
d) Cisco MDS 9250i
08. Exhibit:
Your customer has a FlexPod VMware solution deployed with NFS datastores. As shown in the exhibit, the links between the Fabric Interconnects and storage controllers are single-mode interface groups with autorevert set to true, hosting a single access LIF. NFS I/O is currently going through fabric A to ST-A. The customer wants to use both fabrics for NFS I/O.
In this scenario, what will accomplish this task?
a) Configure VMware hosts to use a new datastore with an NFS LIF on ST-B connected to fabric B.
b) Migrate the existing LIF that is used for NFS I/O on ST-A to its HA partner ST-B.
c) Add two physical links between SW-A and SW-B.
d) Configure VMware hosts to utilize an NFS LIF on ST-B that is connected to fabric A.
09. Which two NetApp storage solutions are supported in FlexPod solutions?
(Choose two.)
a) ONTAP Select
b) NetApp AFF
c) NetApp E-Series
d) NetApp StorageGRID
10. You currently have a FlexPod Datacenter solution, and you are merging with another company.
That company's environment currently has a mix of different Cisco servers. You want to add as many of those servers to your FlexPod solution as possible.
In this scenario, which two Cisco servers are supported in a FlexPod environment?
(Choose two.)
a) HX240c Edge M5
b) C480 ML M5
c) S3260 M5
d) B200 M5
Solutions:
Question: 01
Answer: a, d, e
Question: 02
Answer: b
Question: 03
Answer: a, b
Question: 04
Answer: a, d, e
Question: 05
Answer: a, b
Question: 06
Answer: b
Question: 07
Answer: c, d
Question: 08
Answer: a
Question: 09
Answer: b, c
Question: 10
Answer: b, d
Not every IT certification is intended for professionals, but NetApp certification is a great deal. After achieving this NetApp NS0-176, you can grab an opportunity to be an IT professional with unique capability and can help the industry or get a good job. Many individuals do the Cisco certifications just for the interest, and that payback as a profession because of the worth of this course.
コメント